FHUGEN HONU V2.0 Video Cage for Panasonic GH3 / GH4 / Sony A7/A7R/A7S
Honu V2.0 Video Cage
For Panasonic GH3 / GH4 / Sony A7/A7R/A7S
(Conditional installation on Nikon Z50 without hotshoe lock)
UNIQUE, FRESH & INNOVATIVE DESIGN.
This unique, fresh and innovative design is the culmination of extensive research coupled with forward looking vision. Our design process is a series of precise steps that the engineers engage with that fosters innovative results.
NEW CAGE MODIFICATIONS
The Honu v2.0 has been redesigned and modified to fit the Sony A7/A7r. Now with an extended battery cut out and a slotted camera mount you can use the Sony A7/A7r with all of the features of the Honu Cage. You will have access to your Sony's battery, audio/video ports, and media.
HOTSHOE LOCK
The Honu Cage - {GH3/GH4 and Sony A7/A7r} is designed to wrap around the GH3/GH4 and and Sony A7/A7r camera body as closely as possible while locking into it by fastening to the bottom of the camera and on the top via the HotShoe Lock. This double fastening system ensures a rock steady mount of the camera even under demanding situations such as using a follow focus. For Sony Models HotShoe Lock must taken off to properly fit the Sony A7/A7r/A7s camera.
MONITOR FITS
There is plenty of room to swivel and tilt the OLED display monitor to facilitate shooting from high or low angles.
CABLES FIT
We made sure that all of your cables can still be routed into the GH3/GH4 and Sony A7/A7r. There are plenty of hole mounts to add on our optional HDMI Clamp or any other accessories such as a microphone.
ANTI TWIST
We have included anti-twist front stops on the forward edge of the cage that aligns the GH3/GH4 camera parallel to the cage.
BATTERY ACCESS
Battery access is crucial during a shoot and we ensured that the battery can be serviced with the Honu Cage - {GH3/GH4 and Sony A7/A7r} attached.
MEDIA ACCESS
The SD Card door is fully accessible with the Honu Cage - {GH3/GH4 and Sony A7/A7r} attached.
DOVETAILS
There are three hotshoe dovetails on the top of the cage, one on each side and one in the center. Accessories with hotshoe mounts on them can be easily attached to the cage. The center dovetail is great for a hotshoe mount handle or microphone.
Optional accessories:
TOP HANDLE
The Honu Top Handle features multiple 1/4-20 threaded and pass through holes casted out of aluminum. These holes can be used to add more small accessories onto your cage.
INDUSTRY STANDARD 15MM RAILS
The clamp on the Honu Top Handle is based on industry standard 15mm rails so you can remove the handle and add your own 15mm accessory.